GfG Ethanol Distillery Safety Alarm - Single Point System

The GfG Ethanol Distillery Safety Alarm System is designed to protect customers and workers from the dangers of Ethanol vapour, which may be discharged via leaks in tanks, casks, transfer pumps, pipelines, and flexible hoses. Ethanol alarm systems are critical in distilleries and breweries where there is a risk of explosion from Ethanol vapour when exposed to ignition sources such as:

• Open flames
• Welding and torch cutting
• Electrical, mechanical, and static sparks
• Hot surfaces
• Heat generated by friction
• Radiant heat

• Wired Ethanol Sensor (CC22): The CC22 D uses an catalytic sensor to detect Ethanol. The current measured values are displayed on the 2.2-inch display, which lights up red in the event of an alarm. The long-life sensors make the IR22 D an economical solution for detecting gases in measuring ranges such as 0 to 100% Lower Explosive Limit (LEL) of Ethanol. Its automatic temperature compensation and the linearization of the measuring signals ensure high measuring accuracy.
• Remote Display/Monitor (GMA22-MW): The GfG GMA22-MW is a versatile controller for smaller gas detection systems. When connected to a single CC22-D transmitter the display will indicate the live gas values. Furthermore the GMA22-MW features integrated visual and audible alarms, and four internal relays for additional safety measures.

The GfG Ethanol Distillery Safety Alarm System is easy to install and use. Simply mount both units on the wall and connect with 2-4 core wire (between 0.5 & 1.5mm) Plug the monitoring unit into a standard wall outlet, and the alarms are ready to protect your customers and employees.

Standard Kit Includes:

GMA22-MW - Remote Display/Monitor (Download Brochure)

• 2,2″ graphic display, 3 buttons and a buzzer max.100dB(A) adjustable 4 status LEDs for alarms and operating states
• Powered by 24V DC (20-30V DC) 
• 4 SPDT relays automatically control fans to ventilate confined spaces
• IP64 according to IEC 60529
• Single sensor Input via RS-485

CC22-D - Single Point Catalytic Ethanol Detector with Display (Download Brochure)

• Measuring principle: Catalytic Gas sensor for Ethanol
• Expected sensor lifetime: > 5 years
• Color 2.2-inch display, built in button interface, buzzer
• Signal transmission: RS-485
• Protection class: IP54

Hard Wiring - Comprehensive Instruction Manual 

Features

• New faster-responding cataltic sensor technology
• More flexible - extend remote sensor up to 90 metres from the main unit
• Large displays clearly indicates current Ethanol concentration.
• 4 SPDT relays automatically control fans to ventilate confined spaces
• 100dB audible and visual alarms on both units
• IP rated enclosures - prevents water damage during wash-down
• Suitable for Ethanol vapors outside Ex zones