cart SHOPPING CART
shopping-cart SHOP ONLINE
 
FREE DELIVERY for orders over $100
Shop Online

Refer a friend

Know a friend, relative, or co-worker who may be interested in this product? Take this opportunity to let them know.
Friend's Email
Your Email
Your Name
The Message.
Hi, You're receiving this email because {name} thinks the GfG Polytector III G999C (1-7 Gases) Multi-gas detector for use in confined spaces would interest you.

The Polytector III G999C combines the requirements of a modern multi-gas detector for use in personal protection with the ability to clear confined spaces, shafts and vessels by means of an integrated pump. The robust and handy multi-gas detector is equipped with a catalytic combustion sensor for flammable gases, an infrared sensor for CO2 and 3 electrochemical sensors for toxic gases as well as oxygen. In this configuration, the G999C is versatile in use and suitable for a wide range of applications.

The Polytector III G999C is the best choice for personal protection against a wide range of gas dangers as well as clearing confined spaces before entering. The multi-gas detector is equipped with 5 sensors for the detection of up to 7 combustible and toxic gases as well as oxygen. Clearance measurement is done with the integrated pump.

Safety and operation
The Polytector III G999C is certified for use up to Ex zone 1 and protected against the ingress of water and dust according to protection class IP67, making the multi-gas detector suitable for challenging applications. The housing made of rubberized polycarbonate offers excellent protection against shocks and vibrations. Its effective design and the robust crocodile clip ensure high wearing comfort. The G999C is operated via three buttons and the color-backlit display. For better usability, the screen can be rotated by 180 degrees if required, and an explosion-proof flashlight will solve any problems with poor light conditions. 

Features & Benefits:

  • Gas detector for 1 up to 7 Gases
  • Optional Wireless function
  • Man-Down Alarm
  • TeamLink Connect Safety Monitor compatible. Range 700 mtrs
  • Infrared Interface
  • Data logger
  • Ex protected Lamp
  • Graphic display with colour change during alarm (green, orange, red)
  • Alarm: visual, audible and vibration alarm
  • Switchable on the fly between diffusion to sampling pump modes
  • Protection: IP67
  • Catalyic sensor for combustible gases and vapours
  • Electrochemical sensors for O2, H2S, CO, NO2, SO2, CL2, NH3, NO, HCL, HCN, PH3, ETO, SiH4, H2, CLO2
  • Infra-Red sensors for CO2, CH4, ETF & Hydrocarbons. Single, dual, triple range sensors available.
  • Oxygen Sensors with 2, 3 or 5 year warranties
  • Rubberised polycarbonate case
  • Weight up to 395grams depending on sensors fitted
  • Dimensions: 68 x 136 x39mm (W x H x D)
  • Lifetime warranty on case and electronics
  • Made in Germany 
Download Brochure:

Alerting, battery life and pump performance
If a threshold value is exceeded, the G999P warns its wearer in three ways by light signals, vibration and a loud horn (103 db(A)). The integrated NiMH battery has a runtime of up to 130 hours, depending on the operating mode and sensor configuration. The metering pump delivers around 0.6 litres per minute from a distance of up to 100 metres.

Connected Safety
Equipped with an optional radio module, up to 10 portable gas detection devices of the G999 series can be connected to the Connected Safety Monitor TeamLink. The supervisor thus always has an overview of the local readings and the status of each team member. In the event of a gas or man-down alarm, the supervisor can initiate help quickly and in a targeted manner. The G888/G999 Visual software also makes it possible to monitor more than 10 portable gas devices and send short messages.

Accessories
The DS400/404 docking station can be used to charge, calibrate and adjust the gas detectors of the G999 series. To better distinguish gas detection devices for different applications, they can be marked with diffusion covers in five signal colours. Clearance measurement is made easier with various suction tubes and floating probes. A complete overview of the accessories and all extensions offered for the G999 series can be found at the bottom of this page.

Model variants
There are four other models available in the G999 series: the G999C, G999S, G999P and G999M. All of these detectors offer slots for 3 electrochemical and an optional (combination) infrared sensor. Depending on the model variant, G999s also come with a catalytic sensor (G999C & G999M), a PID sensor (G999P), a fourth electrochemical sensor (G999E) or a CC/TC or CC/TC/SC sensor (G999S). This allows you to set up a variety of combinations of up to eight gases or measuring ranges for simultaneous monitoring. The G999M, which was developed specifically for the mining sector, is not only approved for use in Ex zone 0 but also received the M1 label for safe use underground. If you require a multi-gas detector without an integrated pump, the handy Microtector G888 is a great choice. It comes in two different versions: the G888C for use in Ex zone 1 and the G888M, which can be used in Ex zone 0 and is approved for mining applications. Both models feature slots for up to 5 sensors (3x EC, 1x CC, 1x IR).

 

For more information, please click Here Regards,
Bracketed text e.g {name} indicates details that will be completed by the system when you click the submit button.

In order to assist us in reducing spam, please type the characters you see:

About safety.kiwi

The safety.kiwi ecommerce webshop is operated by Accurate Instruments (NZ) Ltd.
Based in Auckland, Accurate is one of the few 100% New Zealand owned and operated safety instrumentation companies in New Zealand today. This is in a market dominated by larger foreign owned companies, yet we continue to operate as a strong independent supplier to the NZ market.

 

 

CONTACT US

FREEPHONE
 0800 500 380

192 Marua Road
Mt Wellington
Auckland 1051

VIEW MAP		 4 Avenger Crescent
Wigram
Christchurch 8042

VIEW MAP